Maintenance And Cleaning; Disposal - Renkforce 1168975 Notice D'emploi

11. Maintenance and cleaning

• Before cleaning, disconnect the product from the connected devices and unplug it
from the power outlet.
• There are no components located inside the product you need to maintain. Never
open/dismantle the product.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much
pressure to the housing as this may cause scratch marks.
• You can easily remove dust using a long-haired, soft and clean brush.

12. Disposal

Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
32