Blackout; Troubleshooting - Renkforce 1168975 Notice D'emploi

h) Blackout
Press the BLACK OUT button (8) to set the connected devices to blackout mode.

10. Troubleshooting

The DMX controller features a state-of-the art design and is safe to operate.
Nonetheless, errors and malfunctions may occur. Please review the following for
information on troubleshooting should problems occur.
No function, although the on/off switch (13) is on I position.
• The power adapter is not properly connected to the wall socket.
• The barrel connector of the power adapter is not properly connected to the power
jack (12).
• No power supply at the wall socket.
Connected light effects are without function.
• The blackout mode has been activated.
• The DMX addresses are not set correctly.
• The connection between the product and the connected light effects has been
disconnected.
• The DMX cable is too long or subject to interferences. Use a special DMX high-
frequency cable.
Sound-to-light control does not work.
• The sound-to-light control has been deactivated. Press the Run mode button (9). The
SOUND LED must light up.
• The volume for music playback is too low. Try to use a higher volume setting.
31