Tascam DR-10X Mode D'emploi page 19

Menu item Summary
Internal clock
setting
DATE/TIME
Year/month/
date/hour/
minute
Restore factory
SYSTEM INIT
default settings
Shows the
VERSION INFO
firmware version
Setting items
(default value Explanation
underlined)
"YY-MM-DD HH:MM"
1 2 3 4 5
1: YY (year), 2: MM (month), 3: DD (date), 4: HH (hour), 5: MM (minute)
YY-MM-DD
Press the 7'9 [ENTER] button to move the cursor from left to right: 1q2q3q4q5.
HH:MM
When the cursor is at 5 on the far right, press the 7'9 [ENTER] button to confirm the date and time and
return to the Menu Screen.
Use the . [j] and / [k] buttons to change the number at the cursor position.
Use this to restore the various settings of this unit to their default values (factory settings).
Sure? YES/NO YES: Initialize the settings. After initializing completes, the Menu Screen reappears.
NO: Return to the menu screen.
This is the firmware version used by the unit.
Vx.xx xxxx
When the version is being shown, press the 7'9 [ENTER] button to return to the Menu Screen.
19
TASCAM DR-10X