Fellowes Array AR1 UVC Guide D'installation page 5

BULB AND FILTER INSTALLATION PROCEDURE
1
Open the door by pulling down on the door panel.
The fan and UV light will turn off when the door
opens.
4
back into the locked position.
2
Open Bulb door by rotating the three locks.
5
door, press door closed on corners and directly
beneath latch to ensure magnets and latch are
fully secured.
3
Remove new bulb from packaging and dispose
of packaging.
Install new bulb by first securing the bulb in the
bulb clamp and then sliding it into the socket
until secure.
While installing, do not handle lamp with bare
hands.
5