Publicité
Les langues disponibles
Les langues disponibles
PACKAGING CONTENTS
TOOLS REQUIRED FOR INSTALLATION
NOTE:
Three people are required for easy and proper installation
NOTE:
We recommend removing adjacent ceiling tiles for easiest
installation
NOTE:
It is required to remove one cross-tee in the ceiling grid
INSTALLATION INSTRUCTIONS
1
Before beginning installation, ensure that a
qualified electrician has run a 120V circuit to the
installation area. Remove unit from packaging
and stage on a tabletop or other surface under or
near installation area with door facing upwards.
2
above the drop ceiling
the weight of the system
channels be used to loop cables if there are no existing mounting points
available above the perimeter of the housing.
NOTE:
NOTE:
2
Open unit door by pulling upward on the
door panel.
Do not install next to a return or register
Shut off circuit breaker to installation area before
beginning installation
3
Remove UV Bulb package and set out of the way
for now.
ENGLISH
Publicité
