Makita DPJ180 Manuel D'instruction page 8

Dust bag
1
2
► 1. Dust bag 2. Fastener 3. Dust nozzle
To attach the dust bag, fit it onto the dust nozzle. If the
dust bag becomes an obstacle to your work, turn the
dust nozzle to change the dust bag position.
When the dust bag is about half full, switch off and
remove the battery cartridge. Remove the dust bag from
the tool and pull the bag's fastener out. Empty the dust
bag by tapping it lightly to remove as much of the dust
as possible.
NOTE:
• If you connect a Makita vacuum cleaner to your
plate joiner, more efficient and cleaner opera-
tions can be performed.
OPERATION
How to make joints
WARNING:
• Always clamp the workpiece to the workbench
before each operation.
3
Corner Joint (Fig. A)
8 ENGLISH
Fig. A