Design Information - Cafe Cgu486 Instructions D'installation

PRODUCT DIMENSIONS AND CLEARANCES FOR 48" MODELS
WARNING
Installations
to combustibles. A custom hood
combustible surfaces must have
installation instructions for specific
hood clearances.
The surface of the entire back
or other stone.
CAUTION
To prevent
drafts from affecting burner
floor under appliance and behind
** As defined in the National Fuel Gas
combustible materials are not part of the
certified by CSA. Clearances less than
12" must be approved by local codes
ADDITIONAL CLEARANCES:
Working areas adjacent to
the rangetop should have 18"
countertop and the bottom of the
back edge of countertop and 3 in.
minimum from cutout to side edges
4

Design Information

Front of
Bullnose
48" Minimum
48" Minimum
to Combustibles
48" *
18" Min.
Back
3" Min.
Island Cutout
Universal Utility Locations
2"
17"
Locate gas
inlet on back
floor 2" from
12" Minimum to
Adjacent Wall
12" Minimum
Each Side
48"
12" Minimum to
Combustibles or 0"
material above the
cooking surface **
3" Min.
16"
8"
a 4" high backsplash
the rangetop to slide
48" Min. to
Combustibles
0"
Clearance
31-2000816 Rev. 0