Cherry MW 4500 Mode D'emploi page 13

The LED flashes depending on the
setting:
1x = 600 dpi
2x = 900 dpi (default)
3x = 1200 dpi
2 Switching off the mouse
The mouse switches to energy-saving
mode if it is not moved for 10 seconds. It
detects any movement and does not need
to be switched on again.
However, it still consumes power in the
energy-saving mode, therefore you should
switch it off manually for longer periods
of disuse or for transporting.
3 Tips
3.1 Battery status LED
The batteries need to be changed shortly
after the LED flashes.
3.2 Battery service life
When the 1200 mAh batteries supplied
are used, they have a service life of up to
6 months.
3.3 Surface under the mouse
A bright, structured surface under the
mouse saves energy, increases
effectiveness and ensures optimum
motion detection.
A reflective surface is not suitable for
using the mouse on.
13