dB Technologies IA 504D Manuel D'utilisation page 43

English
SETUP
The Setup window lets you choose the input type (from the drop-down menu), configure the amplifier outputs
(the AES/EBU output configuration can be set as Link or Processed) and adjust the sine tone level. You can click
the Configure button to load presets created by dBTechnologies (Out Mode menu), and select the output mode
from Stereo, Bridge or 70/100V.
By default, bridge is disabled and the output impedance is set to 4 Ohm.
IA504D Cod. 420120399 REV. 1.0
43