Ecor Pro EPD170LGR Mode D'emploi page 12

Humidistat Mode
Ad on mode press MENU SELECTION to adjust the set value
from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%-
90%. Choose the desired value and wait for 5 seconds, the sett
will be kept. CO means continuous dehumidifying.
Temp Units
Shows the current temperature scale. Press MENU SELECTION
to set Fahrenheit or Centigrade scale.
Coil Temp
Shows the evaporator coil temperature.
Comprss Current
Shows the current draw in amps.
If the unit can not detect the compressor current, the display
shows - - A.
Code Message
If the unit on-board diagnostics discover a problem, the unit will
display the error message, see the Code Message next page.
12