Husqvarna PP 70 Manuel D'utilisation page 11

The light goes from the left side to the right
side and then to the left side again.
Product display
Control panel
1244 - 002 - 18.05.2020
The light goes from the left to the right side.
Status
There is no power.
Function test of LED at
connection of power. (< 3
s)
The product is in standby
mode.
Phase selection sequence
at start. (< 3 s)
The product is on and con-
nected to 1-phase.
The product is on and con-
nected to 3-phase.
Power fault.
Step
Do a check of the power
supply.
Do a check of the machine
To do
stop button. Refer to
a check of the machine
stop button on page 7 .
N/A
If >3 s, do a check of the
fuses and voltage.
N/A
N/A
Do a check of the fuses
and the generator.
11