Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Important Safety Instructions
•
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Only use attachments/accessories specified by
the manufacturer.
•
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Keep children and bystanders away while
operating an inspection camera. Distractions can
cause you to lose control.
Personal Safety
a ) Stay alert, watch what you are doing and use
common sense when operating an inspection
camera. Do not use an inspection camera while
you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention
while operating the inspection camera may result in
serious personal injury.
b ) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c ) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the inspection camera in unexpected situations.
d ) Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
Use and Care
a ) Store an idle inspection camera out of the
reach of children and do not allow persons
unfamiliar with the inspection camera or these
instructions to operate the inspection camera.
Inspection cameras are dangerous in the hands of
untrained users.
b ) Use the inspection camera, accessories and tool
bits, etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the inspection
camera for operations different from those intended
could result in a hazardous situation.
2
Battery Tool Use and Care
a ) Recharge only with the charger specified by
D
WALT. A charger that is suitable for one type of
e
battery pack may create a risk of fire when used with
another battery pack.
b ) When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
c ) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
Safety Information for Inspection
Cameras
WARNING: Do not disassemble or modify the
inspection camera. There are no serviceable
parts inside. If you need assistance contact D
at 1-800-4-D
WALT (1-800-433-9258) or go to http://
e
www.D
WALT.com on the Internet.
e
Do not operate the inspection camera in explosive
•
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Inspection cameras create sparks
which may ignite the dust or fumes.
•
The inspection camera should only be used with
specifically designated D
other batteries may create a risk of fire.
•
Store the inspection camera out of reach of children
and other untrained persons. Tools are dangerous in
the hands of untrained users.
Do not disassemble the inspection camera. There are
•
no user serviceable parts inside.
•
Do not use anywhere the unit may come into
exposure with moving parts, hazardous chemicals,
or electrical charges. Such situations may result in
serious injury or death; such as walls, pipes, automobiles,
and machinery
•
Do not operate inspection camera near moving
machinery. Can result in injury if the camera cable gets
caught into moving parts and pulls the user in.
•
Do not use the inspection camera around corrosive
chemicals. Exposure to corrosive, oily environments can
ruin the plastic covering on the camera head and ruin the
picture quality.
•
Do not use the camera if condensation forms inside
the lens. Let the water evaporate before using again.
Do not remove or deface warning labels.
•
WARNING: Do not expose camera, monitor or battery
to excessive heat such as sunshine, fire or the like.
WARNING: Shock hazard. Do not allow the
inspection camera cable to come into contact
with live wires. Shut off circuit breakers to the entire
area to avoid injury.
WALT
e
WALT batteries. Use of any
e
Publicité
Table des Matières
