Operating Tips - DeWalt DCT410 Guide D'utilisation

English
To Activate the Time stamp
1. Press the main menu button
Main Menu.
2. Press the forward 20 or back
Time Stamp option.
3. Press the OK button 19 to navigate to the next screen.
4. Press the forward or back arrow to select OFF or ON.
5. Press the OK button to save changes.
6. Press the main menu button to exit.
To Format Micro sD Card
NOTICE: Formatting the micro SD card will erase
all data.
1. Press the main menu button
Main Menu.
2. Press the forward 20 or back
Format Disk option.
3. Press the OK button 19 to navigate to the next screen.
4. Press the forward or back arrow to select NO or YES.
12
17 to show the
18 arrow to select the
17 to show the
18 arrow to select the
5. Press the OK button to save changes and exit.
To Change Default setup
NOTICE: Changing to default setup will erase
current settings and restore factory settings.
1. Press the main menu button
Main Menu.
2. Press the forward 20 or back
Default Setup option.
3. Press the OK button to navigate to the next screen.
19
4. Press the forward or back arrow to select NO or YES.
5. Press the OK button to save changes and exit.

Operating Tips

• Use only D WALT 12V Max* lithium-ion battery.
e
• Ensure the D WALT battery is in good working
e
condition. If the low battery indicator light on the screen
is flashing, the battery needs to be recharged.
17 to show the
18 arrow to select the