Table des Matières
Publicité
7. Technical Data
Measuring principle:
Electrical resistance
Electrode length:
8 mm
Measuring range:
0...99,9%
Battery:
2 x 1,5 Volt AAA
Housing:
Impact-proof plastic housing
Dimensions:
180 x 50 x 31 mm
Weight:
175 gr
Functions:
Moisture measurement by inbuilt sensor and external cable
sensor, temperature measurement via external cable sensor.
8. Explanation of symbols
This sign certifies that the product meets the requirements of the EEC
directive and has been tested according to the specified test methods.
9. Waste disposal
This product has been manufactured using high-grade materials and components which can
be recycled and reused
Never dispose of empty batteries and rechargeable batteries in household
waste.
As a consumer, you are legally required to take them to your retail store or to an appropriate
collection site depending on national or local regulations in order to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical
and Electronic Equipment Directive (WEEE). Please do not dispose of this
instrument in household waste. The user is obligated to take end-of-life
devices to a designated collection point for the disposal of electrical and
electronic equipment, in order to ensure environmentally-compatible disposal.
10. Care, Maintenance, Storage and cleaning
When the instrument is not in use, keep it in its pouch together with its accessories. Store the
kit in a stable, dust-free environment out of direct sunlight. Remove the batteries from the ins-
trument if it is to be stored for periods of more than one month, or when the low battery power
symbol appears on the display. Check the condition of accessories used with the instrument on
a regular basis and replace them if they become worn or damaged. It should be stored at room
temperature. For cleaning, use only a soft cotton cloth with water or medical alcohol. Do not
submerge any part of the instrument.
22
Table des matières
1. Introduction
2. Conseils / Consignes de sécurité
3. Contenu
4. Distribution et utilisation
5. Manipulation de l'appareil
5.1
Description de l'appareil
5.2
Instructions pour la mesure
5.3
Utilisation de l'appareil sans capteur de température 25
5.4
Correction de température automatique (CTA)
5.5
Réglage de l'arrêt automatique
5.6
Contrôle de l'étalonnage et de la pile
6. Etalonnage Tableau des bo
7. Données techniques
8. Dispositions générales / Légende
9. Entretien
Bedienungsanleitung
10. Soins et entretien Conservation & nettoyage
Holzfeuchtemessgerät
Humid Check Pro
Electrodes aiguilles
T
- 1 -
24
24
24
25
25
25
25
25
26
26
27
32
33
33
33
Capteur d'humidité à
enfoncer robuste
Capteur de température
23
Publicité
Table des Matières
