Télécharger Imprimer la page

schmersal BNS 303 Instructions De Montage Et De Câblage page 7

Publicité

Montage- und Anschlussanleitung / Sicherheits-Sensor
Mounting and connection Instructions / Safety sensor
Instructions de montage et de câblage / Capteur de sécurité
Technische Daten
deutsch
Vorschriften:
Gehäuse:
Wirkweise:
Grenzabstände:*
Schaltzustandsanzeige:
Gegenstück:
Spannung:
Strom:
Leistung:
Max. Schaltfrequenz:
Schutzart:
Anschluss:
*Falls kein ferromagnetisches Material in der Nähe von Sensor oder Magnet vorhanden ist.
Technical data
english
Standards:
Housing:
Mode of operation:
Limiting distances:*
Switching position indicator:
Actuators:
Max. switching voltage:
Max. switching current:
Max. switching capacity:
Max. switching frequency:
Protection class:
Wiring :
* If there is no ferromagnetic material in the vicinity of the sensor or the magnet.
Données techniques
français
Normes de référence:
Boîtier:
Fonctionnement:
Distances de fonctionnement:*
Visualisation des états de commutation :
Actionneurs :
Tension commutable max. :
Courant commutable max. :
Puissance commutable max. :
Fréquence de commutation max. :
Etanchéité:
Raccordement:
* Capteur et actionneur libres de tout matériau ferromagnétique.
EN 60947-5-3; EN 1088 (in Verbindung mit den Schmersal Sicherheitsbausteinen AES...)
glasfaserverstärkter Thermoplast
magnetisch
gesicherter Schaltabstand
s
ao
gesicherter Ausschaltabstand s
ar
LED
Betätigungsmagnet BPS 300; BPS 303; BPS 303SS
ohne LED: 100 VAC/DC
mit LED: 24 VDC
ohne LED: 500 mA (BNS 303-03z: 250 mA)
mit LED: 10 mA
ohne LED: 10 VA/W
mit LED: 240 mW
5 Hz
IP 67 nach IEC/EN 60529/DIN VDE 0470-1
BNS 303-..z(G): Leitung Boflex 4 x 0,25 mm
BNS 303-..z(G)-ST: Stecker M12 x 1, 4-polig
EN 60947-5-3; EN 1088 (in conjunction with the Schmersal AES... safety-monitoring modules)
glass-fibre reinforced thermoplastic
magnetic
assured operating distance
s
ao
assured released distance
s
ar
LED
actuating magnets BPS 300; BPS 303; BPS 303SS
without LED: 100 VAC/DC
with LED: 24 VDC
without LED: 500 mA (BNS 303-03z: 250 mA)
with LED: 10 mA
without LED: 10 VA/W
with LED: 240 mW
5 Hz
IP 67 to IEC/EN 60529/DIN VDE 0470-1
BNS 303-..z(G): Boflex cable 4 x 0,25 mm
BNS 303-..z(G)-ST: connector M12 x 1, 4-pole
EN 60947-5-3; EN 1088 (en liaison avec les modules de sécurité de la série AES ... de Schmersal)
thermoplastique renforcé de fibres de verre
magnétique
portée de travail assurée
portée de déclenchement assurée s
LED
aimants de commande BPS 300; BPS 303; BPS 303 SS
sans LED : 100 VAC/DC
avec LED : 24 VDC
sans LED : 500 mA (BNS 303-03z: 250 mA)
avec LED : 10 mA
sans LED: 10 VA/W
avec LED: 240 mW
5 Hz
IP 67 selon IEC/EN 60529/DIN VDE 0470-1
BNS 303-..z(G): câble Boflex 4 x 0,25 mm
BNS 303-..z(G)-ST: connecteur M12 x 1, 4 pôles
= 5 mm, s
= 8 mm (Index -2211)
ao
= 15 mm, s
= 18 mm (Index -2211)
ar
2
;
= 5 mm, s
= 8 mm (Index -2211)
ao
= 15 mm, s
= 18 mm (Index -2211)
ar
2
;
s
= 5 mm, s
= 8 mm (Index -2211)
ao
ao
= 15 mm, s
= 18 mm (Index -2211)
ar
ar
2
;
BNS 303

Publicité

loading