Important Safety Advice; Ec Declaration Of Conformity - Truvox International Orbis OBF431500 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE
Introduction
The following instructions contain important information about
the machine and safety advice for the operator. Equipment
must be operated, serviced and maintained in accordance with
the manufacturer's instructions. If in doubt contact the supplier
of your machine.
Read all instructions before using the
machine
Product information
These commercial floor treatment machines are designed for
the high speed polishing and burnishing of hard floors in indoor
areas. A passive dust control system is supplied as standard
with each model. This machine is for indoor use only. The
machine is intended for commercial use, for example in hotels,
schools, hospitals, factories, shops, offices, rental businesses
and other than normal housekeeping purposes.
Technical Specifications
Model
Voltage AC (~)/
V/ Hz
Frequency
Motor Power
Productivity rate
m²/h
Pad / brush speed
Pad / brush pressure
g/cm²
Pad / brush diameter
Sound pressure level
dB(A)
Sound pressure level
dB(A)
(with vacuum)
Dimensions (L x W x
H) with handle
Weight
Cable length
Warranty
• Noise levels measured at a distance of 0.25 meter from machine
and 1.5 metres above floor, when washing a hard floor.
Measurements recorded using a hand held meter.
• Handle vibration does not exceed 2.5 m/s², when operating on a
smooth hard surface.
Above dimensions are approx. Since the company's policy is to
continuously improve the product, there could be changes without
prior notice.

EC DECLARATION OF CONFORMITY

Machine Type: Floor Cleaning Machine
Model: OB4F31500..., OBF501500
This machine is in conformity with the following EU directives:
• Machinery Directive:
• The EMC Directive:
Applied harmonised standards:
EN60335-1, EN60335-2-67, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN62233
Truvox International Limited
Unit C (East), Hamilton Business Park,
Manaton Way, Botley Road,
Hedge End, Southampton,
SO30 2JR, UK
2
OBF431500
OBF501500
230 / 50
W
1100
900
rpm
1500
5.5
cm
43
65.7
69
65 x 47 x
cm
125
kg
34
m
15
2
Years subject to conditions
2006/42/EC
2004/108/EC
Malcolm Eneas
Operations Manager
Southampton, 09/04/2015
IMPORTANT
Waste Electrical & Electronic Equipment
(WEEE)

IMPORTANT SAFETY ADVICE

The safety information described in this manual provides basic
precautions and supplements standards in force in the country
where the machine is used.
This symbol warns the operator of hazards and unsafe
practices which could result in severe personal injury
or death.
1. This machine must only be used for the manufacturer's
approved application as described in this manual.
2. The machine must be unpacked and assembled in
accordance with these instructions before connecting to the
230/50
electrical supply.
1100
3. Operators must be fully trained in the use of the machine in
accordance with these instructions, able to perform regular
900
user maintenance and the correct selection of accessories.
1500
4. Operators should be physically capable to manoeuvre,
transport and operate the machines.
4
5. Operators should be able to recognise unusual operation of
50
the machine and report any problems.
65.7
6. Only genuine accessories and spare parts provided with
the machine or those approved by the manufacturer should
69
be used.
service agent.
72 x 55 x
7. Do not use without filters in place.
125
8. Do not modify the machine from its original design.
34.5
9. Only use the machine on firm level surfaces. DO NOT use
15
on a gradient or more than 2% slopes.
10. DO NOT use on rough uneven surfaces e.g. industrial or
coarse concrete surfaces.
11. DO NOT use outdoors e.g. on patios, decks or rough
surface.
12. DO NOT use diesel/petrol or corrosive detergents to wash
floors, even if diluted.
13. This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the machine by a person responsible for their safety.
14. Keep children and unauthorised persons away from the
machine when in use. Do not use as a toy.
15. The machine must be kept clean and in good condition with
regular inspections of the power cord lead and plug for
signs of any damage. If any parts are damaged they shall
only be replaced by an approved part by the manufacturer,
its service agent or a similar qualified person in order to
avoid a hazard.
Do not dispose of this device with unsorted waste.
Improper
disposal
may
environment and human health. Please refer to your
local waste authority for information on return and
collection systems in your area.
WARNING – to reduce the risk of injury, electric
shock or fire.
All repairs must be performed by a qualified
ELECTRICAL HAZARD
be
harmful
to
the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Orbis obf501500

Table des Matières