Troubleshooting; Scrapping - Kent Razor Sv17 Instructions D'utilisation

INSTRUCTIONS FOR USE

TROUBLESHOOTING

TROUBLE
No motor ignition; no warning
light on
No vacuum system motor
ignition
Insufficient dirty water
vacuuming
Insufficient solution flow to the
brush/pad
Squeegee-related marks
For further information refer to the Service Manual, available
at any KENT Service Center.
14
REMEDY
Disconnected battery terminals
Completely discharged batteries
Blown fuse
Recovery water tank full
Clogged vacuum grid or stuck
closed float
Vacuum hose disconnected from
the squeegee or faulty
Dirty squeegee, or worn or
damaged squeegee blades
Improperly closed recovery water
tank cover; worn gasket or clogged
compensation hole
Dirty solution filter
Dirty recovery water tank (clogged
drain hole)
Debris under the squeegee blades
Worn, chipped or torn squeegee
blades

SCRAPPING

Have the machine scrapped by a qualified scrapper.
Before scrapping the machine, remove the following
components:
– Batteries
– Brushes
– Plastic hoses and components
– Electrical and electronic components
CAUTION!
Removed components must be disposed of
according to the law in force.
Razor SV17 — 909 6309 000(1)2006-01