Askle Sante WINNCARE WINNSAVE Manuel D'utilisation page 17

INSTRUCTIONS
Closing
Put the metalic tip through the eyelet hole in the fabric strap. Insert the strap eyelet intended to close the restraining device. Close by clicking
the button on the tip.
Precautions: when installing a restraining device, check that the closing system is correctly locked.
To facilitate opening, release the pressure applied to the button.
Device for restraining or securing the patient's chest to the bed
Precautions: the waist restraint straps are fastened in the middle of the bed's long sides. Tighten until crushing the edge of the mattress. Lock
the moving functions of the bed if possible (back and leg rests). Adjust the length of the removable pelvic strap before use according to the
patient's morphology.
Chest restraint with or without extensions
Precautions: In the case of a medical bed with adjustable height, fasten the device to the mobile parts that move with the patient. In the case of
a non-medical bed, fasten the device to the bed base or frame. Lock the moving functions of the bed if possible (back and leg rests).
Device for restraining or securing wrists
Ankle restraints
Secure wrists on the waist restraint strap
or to the fixed side part of the bed.
Secure wrists using the buckle and fasten
to the fixed structure of the bed.
Restrain ankles by fastening to the fixed structure of the bed rail. In
the case of severe agitation, the bed rail can be secured using an
extension secured to the middle of the rail and bed frame. Lock the
moving functions of the bed base.
17