Technical Specifications - tbs electronics Omnicharge DC OCD12/12-50 Mode D'emploi

5. TECHNICAL SPECIFICATIONS

Parameter
Nominal input voltage
Input voltage range
Maximum input current
Current consumption (inactive)
Current consumption
(noload/standby)
Nominal output voltage
Output voltage range
Maximum output current
Charge characteristic
Supported battery types
Operating temperature range
Storage temperature range
Cooling
Communication port
Temperature sensor port
Engine run / activate input port
BMS input port
Status output port
Protections
Indications
Battery connections
Enclosure body size (HxWxD)
Total weight
Protection class
Standards
1) Maximum output current tolerance is +/-10%. Automatic output current derating at Tambient > 40°C.
2)
Selectable by DIP switch. All standard charge voltages can also be modified by the TBS Dashboard application.
Please act according to your local rules and do not dispose of your old products
with your normal household waste. The correct disposal of your old product
will help prevent potential negative consequences for the environment and
human health.
OCD 12/12-50
12.0 – 16.0Vdc
1)
IUoUo, intelligent 3-stage, temp. Compensated
2)
Yes (> 2.0Vdc = Active and < 1.0Vdc = Inactive)
Yes (> 3.0Vdc = Standby and < 1.0Vdc = Active)
Yes (open drain, 32Vdc / 150mA max, five assignable
High/low input voltage, high temperature, output short
circuit and reverse battery polarity (input + output)
Input status, output (charge-) status, error
EMC: 2014/30/EU, Low voltage directive: 2014/35/EU,
RoHS: 2011/65/EU, Automotive: EN50498 („E" pending)
18
12Vdc
10.0 – 16.0Vdc
65Adc
< 0.25mA
< 35mA
12Vdc
50A
Flooded / Gel / AGM / LiFePO4
-20°C ... +60°C
-30°C ... +70°C
Variable speed fan
QuickLink
Yes (sensor included)
status types)
3x M6 screw terminal
70 x 128 x 170mm
1.2kg
IP21
Note : the given specifications are subject to change without notice.
OCD 12/24-30
< 45mA
24Vdc
24.0 – 32.0Vdc
30A