Hoover HIES644DC Manuel D'utilisation page 9

Execute a recorded cooking cycle
E_decfTeZ`_d W`c NdV
Press the memory key, the timer indicator displays
_decfTeZ`_d W`c NdV
" ",wait for 5 seconds, then displays"
U^[d j^[ fem[h _i im_jY^[Z ed1 j^[ Xkpp[h m_bb
zone corresponding at the recorded cooking cycle
iekdZ edY[ iekdZ edY[
[h m_bb [h m_bb
WdZ Wbb j^[ _dZ_YWjehi m_bb Yec[ ed \eh ed[ i[YedZ WdZ j^[d
fety mode
will switch on and starts performing the cycle.
]e ekj3 R^[ ^eX _i dem _d ijWdZXo ceZ[3 ObWY[ j^[ fWd _d
[ i[YedZ WdZ j^[d i[YedZ WdZ j^[d
j^[ Y[djh[ e\ j^[ Yeea_d] ped[3
ObWY[ j^[ fWd _d ObWY[ j^[ fWd _d
Execute a recorded cooking cycle Execute a recorded cooking cycle
Operating instructions
ock:
E_decfTeZ`_d W`c NdV E_decfTeZ`_d W`c NdV
power cord of the hob are not accessible after power cord of the hob are not accessible after
Press the memory key, the timer indicator displays Press the memory key, the timer indicator displays
installation. installation.
If the corresponding zone was already on, the
" " ",wait for 5 seconds, then displays" ",wait for 5 seconds, then displays"
U^[d j^[ fem[h _i im_jY^[Z ed1 j^[ Xkpp[h m_bb U^[d j^[ fem[h _i im_jY^[Z ed1 j^[ Xkpp[h m_bb
recorded cooking cycle will take the priority and
zone corresponding at the recorded cooking cycle zone corresponding at the recorded cooking cycle
iekdZ edY[ iekdZ edY[ iekdZ edY[ iekdZ edY[
h m_bb m_bb WdZ Wbb j^[ _dZ_YWjehi m_bb Yec[ ed \eh ed[ i[YedZ WdZ j^[d WdZ Wbb j^[ _dZ_YWjehi m_bb Yec[ ed \eh ed[ i[YedZ WdZ j^[d
be performed.
will switch on and starts performing the cycle. will switch on and starts performing the cycle.
]e ekj3 R^[ ^eX _i dem _d ijWdZXo ceZ[3 ObWY[ j^[ fWd _d ]e ekj3 R^[ ^eX _i dem _d ijWdZXo ceZ[3 ObWY[ j^[ fWd _d
i[YedZ WdZ j^[d dZ WdZ j^[d [YedZ WdZ j^[d Z WdZ j^[d
- -
j^[ Y[djh[ e\ j^[ Yeea_d] ped[3 j^[ Y[djh[ e\ j^[ Yeea_d] ped[3
[ j^[ fWd _d ObWY[ j^[ fWd _d bWY[ j^[ fWd _d j^[ fWd _d
If during the execution of a recorded cooking cycle
on the corresponding zone "+" or "-" key,the
Operating instructions Operating instructions
Select the power level by pressing the "+" or "-" key for the
recorded cooking cycle is aborted and normal
relevant induction zone. To begin with the indicator shows
managing is restored.anyway the stored cooking
" " or " " by pressing the "+" or "-" key. Adjust up or down
cycle is kept in memory.
If the corresponding zone was already on, the If the corresponding zone was already on, the
by pressing the "+" or "-" key.
recorded cooking cycle will take the priority and recorded cooking cycle will take the priority and
be performed. be performed.
-
A steam cleaner is not to be used.
If during the execution of a recorded cooking cycle If during the execution of a recorded cooking cycle
on the corresponding zone "+" or "-" key,the on the corresponding zone "+" or "-" key,the
How to record one new cooking cycle
recorded cooking cycle is aborted and normal recorded cooking cycle is aborted and normal
managing is restored.anyway the stored cooking managing is restored.anyway the stored cooking
if we have already recorded one:
nlock:
cycle is kept in memory. cycle is kept in memory.
Hold down the"
will appear. "
memory".
ecial function
How to record one new cooking cycle How to record one new cooking cycle
Then the"
if we have already recorded one: if we have already recorded one:
Hold down the" Hold down the"
If the timer is set on more than 1 zone: If the timer is set on more than 1 zone:
will appear. " will appear. "
memory". memory".
Boost function
50/60Hz
Then the" Then the"
Activate the cooking zone we want to record by
pressing"+" or "-", the recording of
the cycle on the selected zone starts.
50/60Hz
If the timer is set on more than 1 zone: If the timer is set on more than 1 zone: If the timer is set on more than 1 zone: If the timer is set on more than 1 zone:
the SIMMERING key, the indicator will be show "
Boost function Boost function
Activate the cooking zone we want to record by Activate the cooking zone we want to record by
pressing"+" or "-", the recording of pressing"+" or "-", the recording of
the cycle on the selected zone starts. the cycle on the selected zone starts.
the HIGH key, the indicator will be show "
FLEXIBLE AREA
This area can be used as a single zone or as two different
zones, accordingly to the cooking needs anytime.
Cancelling the "BOOST" mode
mory function
Flexible area is made of two independent inductors that can
1 2
1 be controlled separately. When working as a single zone, 2
Note: Note:
the part that is not covered by cookware is automatically
switched off after one minute.
1. WIFI key 1. WIFI key
FLEXIBLE AREA FLEXIBLE AREA
To grant a correct pan detection and a even heat distribution,
2. Flexi K E Y key 2. Flexi K E Y key
This area can be used as a single zone or as two different This area can be used as a single zone or as two different the cookware should be correctly placed:
cording
3. Power regular key 3. Power regular key
zones, accordingly to the cooking needs anytime. zones, accordingly to the cooking needs anytime.
Cancelling the "BOOST" mode Cancelling the "BOOST" mode Timer function
- In the front or rear side of the flexible zone when the
4. Timer regular key 4. Timer regular key
cookware is smaller than 22 cm
Flexible area is made of two independent inductors that can Flexible area is made of two independent inductors that can
If more than 1 zone is switch on :
5. Booster
5. Booster
- Anywhere with bigger cookware
on : on : be controlled separately. When working as a single zone, be controlled separately. When working as a single zone,
Note: Note:
Note: Note:
6. Special function 6. Special function
the part that is not covered by cookware is automatically the part that is not covered by cookware is automatically
7. Memory 7. Memory
switched off after one minute. switched off after one minute.
8. Lock or Pause 8. Lock or Pause
To grant a correct pan detection and a even heat distribution, To grant a correct pan detection and a even heat distribution,
. On/Off . On/Off
the cookware should be correctly placed: the cookware should be correctly placed:
- In the front or rear side of the flexible zone when the - In the front or rear side of the flexible zone when the
iekdZ edY[
Note: he bottom surface and the Note: he bottom surface and the
". The
iekdZ edY[ iekdZ edY[
--
-- --
" key for a while,and the "
2 2
" means "cooking zone stored in
" will be displayed,
1 1
" key for a while,and the " " key for a while,and the "
" means "cooking zone stored in " means "cooking zone stored in
" will be displayed, " will be displayed,
"
"
4 4
3 3 5 5
As big zone
To activate the flexible area as a single big zone, simply press
". The
the dedicated keys.
Note: he bottom surface and the
power cord of the hob are not accessible after
As big zone As big zone
installation.
To activate the flexible area as a single big zone, simply press To activate the flexible area as a single big zone, simply press
". The
The power setting works as any other normal area.
the dedicated keys. the dedicated keys.
If the pot is moved from the front to the rear part (or viceversa),
the flexible area detects automatically the new position,
keeping the same power.
To add a further pot, press again the dedicated keys, in order
to detect the cookware.
The power setting works as any other normal area. The power setting works as any other normal area.
Deactivation of the continuum zone
If the pot is moved from the front to the rear part (or viceversa), If the pot is moved from the front to the rear part (or viceversa),
Resetting the power of the continuum zone or pressing
the flexible area detects automatically the new position, the flexible area detects automatically the new position,
the continuum key again
keeping the same power. keeping the same power.
To add a further pot, press again the dedicated keys, in order To add a further pot, press again the dedicated keys, in order
As two independent zones
to detect the cookware. to detect the cookware.
To use the flexible area as two different zones with different
power settings, press the dedicated keys.
Deactivation of the continuum zone Deactivation of the continuum zone
"
3 3 Resetting the power of the continuum zone or pressing Resetting the power of the continuum zone or pressing
Stop recording
the continuum key again the continuum key again
As two independent zones As two independent zones
To use the flexible area as two different zones with different To use the flexible area as two different zones with different
4 4
power settings, press the dedicated keys. power settings, press the dedicated keys.
If the timer is set on more than 1 zone:
" "
The maximum power of cooking zones is
as follows:
If the timer is set on more than 1 zone: If the timer is set on more than 1 zone:
The maximum power of cooking zones is The maximum power of cooking zones is
as follows: as follows:
Heating Zone
R^[ WXel[ cWo lWho
j^[ cWj[h_Wb _j _i cWZ[ \hec
4
Pan Dimension
Flexible Area
1 2 3
Note:
R^[ WXel[ cWo lWho R^[ WXel[ cWo lWho
8
6 6 7 7 8
j^[ cWj[h_Wb _j _i cWZ[ \hec j^[ cWj[h_Wb _j _i cWZ[ \hec
1. WIFI key
The cooking zones are, up to a limit, automatically adapted
Pan Dimension Pan Dimension
2. Flexi K E Y key
to the diameter of the pan. However the bottom of this pan
3. Power regular key
must have a minimum of diameter according to the
4. Timer regular key
corresponding cooking zone. To obtain the best efficiency
5. Booster
of your hob, please place the pan in the center of the
Note: Note:
6. Special function
cooking zone.
switch off the a recorded cooking zone before 15
7. Memory
second since the starting of the recording in that case
8. Lock or Pause the recording of the cooking cycle is automatically
The cooking zones are, up to a limit, automatically adapted The cooking zones are, up to a limit, automatically adapted
aborted.
7 8
. On/Off
to the diameter of the pan. However the bottom of this pan to the diameter of the pan. However the bottom of this pan
must have a minimum of diameter according to the must have a minimum of diameter according to the
4
corresponding cooking zone. To obtain the best efficiency corresponding cooking zone. To obtain the best efficiency
E_decfTeZ`_d W`c NdV E_decfTeZ`_d W`c NdV
E_decfTeZ`_d W`c NdV E_decfTeZ`_d W`c NdV
Pause mode Pause mode
To enter pause mode: To enter pause mode:
U^[d j^[ fem[h _i im_jY^[Z ed1 j^[ Xkpp[h m_bb U^[d j^[ fem[h _i im_jY^[Z ed1 j^[ Xkpp[h m_bb
WdZ Wbb j^[ _dZ_YWjehi m_bb Yec[ ed \eh ed[ i[YedZ W WdZ Wbb j^[ _dZ_YWjehi m_bb Yec[ ed \eh ed[ i[YedZ
]e ekj3 R^[ ^eX _i dem _d ijWdZXo ceZ[3 ObWY[ j^[ ]e ekj3 R^[ ^eX _i dem _d ijWdZXo ceZ[3 ObWY[ j^
j^[ Y[djh[ e\ j^[ Yeea_d] ped[3 j^[ Y[djh[ e\ j^[ Yeea_d] ped[3
Operating instructions
Operating instructions
To exit pause mode: To exit pause mode:
Note: Note:
2
3
Power Management Fu Power Management F
4
1
Power Management Ope
Power Management Ope
Boost function Boost function
Heating Zone
MehcWb
2000
6
2000
7
Flexible Area
3000
1800
8
1800
9
Heating Zone
MehcWb MehcWb
WYYehZ_d] j
2000 2000
6 6
2000 2000
7 7
Flexible Area
3000 3000
1800 1800
8 8
1800 1800
9 9
5
6
e j^[ i_p[ e\ j^[ fWd WdZ e j^[ i_p[ e\ j^[ fWd WdZ
WYYehZ_d] j WYYehZ_d] j
Cancelling the "BOOST" mode
Cancelling the "BOOST" mode
Timer function Timer function
If more than 1 zone is switch on : If more than 1 zone is switch on :
-- --
Beeij
3000
3000
4000
2300
2300
Beeij Beeij
e j^[ i_p[ e\ j^[ fWd WdZ
3000 3000
3000 3000
4000 4000
2300 2300
2300 2300
8
7
7 K 7 K
ie
iek