CDVI Digicode GALEO 4.0 Manuel D'installation page 10

INSTALLATION MANUAL
GALEO 4.0 Bluetooth
in our company.
Digicode ® indoor/outdoor - IP64 (keypad)
- Polished heavy duty Zamak
Remote controller
- remote controller and intelligence in a protected environment and connected with 3m cable
Plug'n'play connection
- Free voltage
- 12V to 24Vac and 12V to 48Vdc
- 3 independent relay outputs
Intuitive programming
- 100 user codes customisable by each user
Ergonomic
-
Audible and visual feedback
Default programming
There is no master code in the factory setting (only 5 terms)
2 mounting available
- Operation of the BOXCODE perform with CDVI App
- Operation of the BOXCODE with CDVI App or TMGALEO keypad
THE APPLICATION
This app is available from Android 5 and IOS 8.1
6 steps about programming :
1. Press
connected box
10
cdvigroup.com
® cast alloy, high resistance to vandalism
enter the master code
or connection
2. Change the box
name
EN
3. Change user
codes relay 1
(door)