Functions; Dip Switch Settings - JB Systems Mini LED MANAGER Mode D'emploi

ENGLISH

FUNCTIONS

1. INTERNAL MICRO: used for sound activated
chases.
2. DMX INPUT: 3pin male XLR-connector used to
connect universal DMX-cables. This
receives instructions from a DMX-controller or
from another Mini Led Manager when used in
master/slave mode.
3. DMX OUTPUT: 3pin female XLR-connector used
to connect the Mini Led Manager with the next
DMX appliance in the chain or with another Mini
Led Manager when used in master/slave mode.
The mini LED Manager can also be used as
controller for other LED projectors like for example
"LED PAR56/64"
4. ON/OFF SWITCH: used to switch the unit on/off.
5. DIP SWITCHES: when used in DMX mode
(DIP10 = OFF) you can set the DMX-starting
address of the unit. When used in stand-alone
mode (master, DIP10 = ON), you can use the
DIP-switches to set different pre-programmed
options.
6. AUTO DMX ADDRESS BUTTON: see further to learn how to set the DMX address easily.
7. OUTPUT CABLE: used to connect different 24Vdc common anode LED projectors. (max. load: 100W)
The cable uses a special 4pin female connector. You can use the supplied conversion cable to easily
connect different projectors.
8. OUTPUT MONITOR: you can check the separate output state of the 3 colors (red, green and blue)
9. ANALOG SWITCH INPUT: used to connect any external analog switch. This external switch can be
used to switch the general output of the Mini LED Manager on/off. (external blackout)  See further for
more information on how to connect the analog switch.
10. MAINS INPUT: with IEC socket and integrated fuse holder, connect the supplied mains cable here.
11. MAINS FUSE: Always replace this fuse with a fuse that has the same characteristics! (250V/3,15A)

DIP SWITCH SETTINGS

Dip switch 10:
Dipswitch setting Function
DIP10 = OFF  DMX / Slave operation
You can use the automatic DMX addressing feature (see further) or traditional DIP-switches.
Use the dipswitches 1~9 to set the DMX address from 0 to 511.
The first 9 DIP-switches correspond to a certain DMX-value:
DIP #1 #2
Value 1 2
You can combine the values of these switches to obtain any starting address between 1 and
512:
Begin address = 01
Begin address = 05
Begin address = 09
Begin address = 13
...
Begin address = 62
DIP10 = ON  Master operation (stand-alone)
Use the dipswitches 1~9 to set the mode, speed, patterns, fixed color color...etc functions.
Below each of these functions is explained in detail.
JB SYSTEMS®
OPERATION MANUAL
input
#3 #4 #5 #6 #7 #8 #9
4 8 16 32 64 128 256
 switch 1=ON
values: 1
 switch 1+3=ON
values: 1+4 = 5
 switch 1+4=ON
values: 1+8 = 9
 switch 1+3+4=ON
values: 1+4+8 = 13
 switch 2+3+4+5+6=ON
values: 2+4+8+16+32 = 62
3/51 MINI LED MANAGER
ENGLISH
Dip switches 1&2: Mode (Sound/auto/fade/fixed color):
Dipswitch setting MODE
SOUND: internal microphone triggers the selected patterns.
AUTO: the selected pattern runs automatically at the desired speed.
FADE: the colors of the selected pattern fade smoothly at the desired speed.
FIXED COLOR: use DIP-switches 6, 7, 8 & 9 to select the desired colors.
Dip switches 3,4 & 5:Speed (from fast to slow):
Dipswitch setting Auto/FadeMode
Speed 1
Speed 2
Speed 3
Speed 4
Speed 5
Speed 6
Speed 7
Speed 8
DIP switches 6,7 ,8 & 9: Chase & Color:
Dipswitch setting SOUND & AUTO MODE
Standard chase
Bright chase
Mood chase
Spectrum random chase
Spectrum sequence chase
Dynamic chase
Chase Red – Cyan
Chase Green – Purple
Chase Blue – Red
Chase Yellow – Blue
Chase Red – Green
Chase Yellow – Green
Chase Cyan – Orange
Chase Green - Light purple
Chase Red – Yellow
Chase Gold Yellow - Blue
JB SYSTEMS®
OPERATION MANUAL
Fast
Slow
FIXED COLOR MODE
White
Red
Orange
Amber
Yellow
Light Yellow
Apple Green
Light Green
Green
Cyan
Blue
Deep Blue
Purple
Light Purple
Magenta
Pink
4/51 MINI LED MANAGER