Safety Decals - breviglieri Hypermaster 180 Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

operator and about the general accident-preventing regulations established by the Directives and by the laws in force in the country
where the machine is used. It is therefore essential for operators to carefully read this manual, particularly the safety notes, and
to pay great attention to operations which could be particularly hazardous.
The Manufacturer declines all and every liability for failure to comply with the safety and prevention regulations given in
this manual.
Pay attention to this symbol when it appears in the manual. It indicates a possible danger situation.
There are three danger levels:
DANGER:
This is the maximum level danger signal and warns that unless the described operations are carried out
correctly, they will cause serious injuries, death or long term health hazards.
WARNING:
The «WARNING» signal warns that unless the described operations are carried out correctly, they could cause
serious injuries, death or long term health hazards.
CAUTION:
This sign warns that unless the described operations are carried out correctly, they could cause damage to the
machine and/or persons.

2.2 SAFETY DECALS

The machine has been designed and built in compliance with all possible safety standards able to safeguard those who work with
it. Despite this, there may still be residue hazards which are signalled on the machine by decals. These decals (pictograms) are
affixed to the machine and indicate the various situations of insecurity and danger in a brief form.
Keep the decals clean and immediately replace them if they detach or become damaged.
Carefully read the following descriptions and memorize the meanings of the safety decals.
Carefully
read the
instruction
manual
before
beginning
work.
Danger of
upper limbs
being cut off.
Do not remove
the guards and
keep well away
from moving
parts.
Personal
protective
equipment
to safeguard
against noise.
Hypermaster
Before
proceeding with
maintenance
operations,
stop
the machine, lower
it to the ground
and consult the
instruction manual.
Danger of
being caught
up by the
driveline.
It is absolutely
forbidden to
get near the
driveline when it
is operating.
- 23 -
Sharp
objects
could be
thrown
up by the
machine.
Keep at
a safety
distance.
Danger of
falling.
It is absolutely
forbidden to
climb on to the
machine.
Danger of
lower limbs
being cut
off.
Keep
at a safety
distance
from the
machine.
Hitching
points
to lift the
machine.

Publicité

Table des Matières
loading

Produits Connexes pour breviglieri Hypermaster 180

Ce manuel est également adapté pour:

Hypermaster 200Hypermaster 220Hypermaster 250

Table des Matières