Turning The Power On/Off; Turning The Power On; Turning The Power Off - Toshiba PDR-M60 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Turning the Power ON/OFF

Turning the Power ON

Make sure that the SmartMedia™ is correctly loaded. (
Set the mode dial to the desired mode.
In the [
] or [
body.
When the camera is turned ON, the Auto Power OFF function starts
to work.
IMPORTANT
• If no operation is carried out for a fixed amount of time (default: about 1 minute), the power is turned
OFF to prevent battery wear. This is called "Auto Power OFF". To return to the normal state, either
change the mode dial or press the shutter down half way (
About the Auto Power OFF Function

Turning the Power OFF

Set the mode dial to [
The power is turned OFF, and the lens returns to its original position
in the body.
] modes, the lens extends from the camera
].
- 33 -
Page 37).
Additional Information, "AUTO-OFF (page 81)"
Page 29)

Publicité

Table des Matières
loading

Table des Matières