Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

About SmartMedia™ (continued)
• Take care not to touch the SmartMedia™'s electrodes (metal contacts) or allow the electrodes to
become soiled. Use a dry lint-free cloth to wipe away any dirt.
• To avoid damage caused by static electricity during transportation or storage, always use the special
static-free case provided.
• If you are not using the camera for a long period of time, remove the SmartMedia™ and store it in a
safe place.
• Inserting a SmartMedia™ that is charged with static electricity into your camera may cause it to
malfunction. If this occurs, switch the camera OFF and then ON again.
• The SmartMedia™ may feel warm when it is removed from the camera after the camera is used for a
long time. This is normal and not a malfunction.
• The SmartMedia™ has a limited service life. If images can no longer be written or erased, buy a new
SmartMedia™.
• Use the index labels provided with the camera. If you attach a commercially available label, it may
cause a malfunction when the SmartMedia™ is loaded or removed.

Loading SmartMedia™

Set the mode dial to [
Slide the SmartMedia™ cover release knob in the
direction of the arrow 1 to open the cover 2.
].
- 29 -
1
2

Publicité

Table des Matières
loading

Table des Matières