Xylem FLOJET LF Plus Série Guide D'utilisation page 3

LF Plus Series
Operation
The Flojet LF Plus series pumps are available as automatic and manual
demand pumps. The LF Plus will automatically turn on when a fixture is
opened and turn off when all fixtures are closed. The LF Plus is a manual
demand pump for use with an electric faucet.
When starting up an automatic demand pump with a completely dry
system allow time for the demand pump to fill the system. Open a faucet,
allow air to vent and close faucet when water flow is steady. Faucet
strainers and aerators should be cleaned regularly.
To reduce the risk of electric shock, mount pump inside a fully enclosed area. Any other use
not recommended by manufacturer may cause fire , electric shock, injury to person or death.
Do not handle this pump unless power is disconnected. It is recommended that this unit be
installed by a qualidied electrician.
4
Strainers
Pump Series Strainer Number
LF Plus 1740-003
WARNING
ELECTROCUTION HAZARD
Initial Start Up
Demand Off
Demand On
Inlet
3/8 Barb
Outlet Screen
3/8 Barb 40 Mesh