Denios PolySafe Euroline F2-200 W Mode D'emploi page 15

Original
User Manual
4.4 Securing loads
Drums and containers must be secured on the spill pallet.
The load securing support is a painted steel retention bar, which is mounted on the grid. A strap with
ratchet is used to secure the drums.
Fig. 4.4.1
Fitting the load securing support:
Remove the grid from the spill pallet.

Mount the load securing support in the required position on the grid using the U shaped bolt,

washers and nuts supplied. (Fig. 4.4.3)
Run the strap around the stored goods and through the strap guides on the load securing device then
pull the strap tight to secure the goods. (Fig. 4.4.4)
Fig. 4.4.3
225296_BA_PolySafe Euroline_003_INT
Fig. 4.4.2
Fig. 4.4.4
15 Issued 05/2015