Publicité
Les langues disponibles
Les langues disponibles
External recording
Recording the microphone
DISP LAY
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Set MIC LEVEL to the minimum level to prevent acoustic
feedback (i.e. a loud howling sound) before you connect
the microphone.
3
Connect a microphone to MIC.
4
Press AUX repeatedly to select any external source you
like.
AUX DIGITAL is displayed if the digital input is selected.
➜
AUX ANALOG H is displayed if the analogue input for a
➜
standard level source is selected.
AUX ANALOG L is displayed if the analogue input for a
➜
low level source is selected.
5
Press RECORD on the set to enter the recording menu.
Rotate í JOG CONTROL ë to select MIC ONLY.
6
➜
The microphone will be recorded.
7
Press YES to confirm your selection.
PREPARING is displayed.
➜
RECORD?, AUX and the remaining recording time of the
➜
CDR(W) are displayed.
8
Set the optimal recording level on the CD recorder (see
"Adjusting the record level").
In addition you can also set the optimal recording level of
0 0
the microphone by turning MIC LEVEL.
9
Press YES on the set to start recording.
➜
The CD recorder starts to record and
is shown.The remaining recording time of the
SESSION
CDR(W) is displayed.
10
Press Ç on the set to stop recording.
UPDATE is displayed and
➜
22
All manuals and user guides at all-guides.com
ON•OFF
LEVEL
AUX
MIC /
LEV EL
RECORDING IN
goes off.
RECORDING IN SESSION
MIC
Publicité
