Publicité
Les langues disponibles
Les langues disponibles
Internal recording
Recording from the tuner
DISP LAY
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Press TUNER repeatedly to select the FM tuner.Then select
the desired radio station (see "Tuning to radio stations").
3
Press RECORD on the set to enter the recording menu.
REC FM TUNER is displayed.
➜
4
Press YES to confirm.
PREPARING and RECORD? are displayed.
➜
5
Press YES to start recording.
➜
The arrow lights,
RECORDING IN SESSION
recording starts and the actual recording time left starts
to count down.
6
Press Ç to stop recording.
Further recording possibilities
High speed recording of an entire disc, a track or a
program
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Press either CD1, CD2 or CD3 to select the disc you wish
to record from.
3
Press RECORD on the set to enter the recording menu.
4
Rotate í JOG CONTROL ë to select one of the
following high speed recording modes:
If a disc from the CD changer is selected:
REC CD1 (or 2,3) FAST?: for high speed recording of
➜
CD1 (or 2, 3)
Continue with step 5.
REC TR FAST?: for high speed recording of a track
➜
Press YES to confirm.
Rotate í JOG CONTROL ë to select the desired track.
REC TR and the track number is displayed.
➜
Continue with step 6.
If a program is available:
PROG FAST?: for high speed recording of the program
➜
20
All manuals and user guides at all-guides.com
ON•OFF
LEVEL
AUX
MIC /
LEV EL
MIC
is shown,
5
Press YES to confirm your selection.
➜
The arrow starts blinking.The remaining recording time of
the CDR(W), the total recording time of the CDR(W) and
RECORD? are displayed.
Note: If the CDR(W) already contains a recording, ALC will also
become active.
6
Press YES to start high speed recording.
➜
The arrow lights,
RECORDING IN SESSION
speed recording starts and the actual recording time left
starts to count down.
To stop recording press Ç on the set.
0 0
Normal recording while listening to an entire disc,
a track or a program
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Press either CD1, CD2 or CD3 to select the disc you wish
to record from.
3
Press RECORD on the set to enter the recording menu.
4
Rotate í JOG CONTROL ë to select one of the
following normal recording modes:
If CD changer is selected:
RECORD CD1 (or 2,3)?: for listening to CD1 (or 2, 3)
➜
during normal recording
REC TRACK?: for listening to the track during normal
➜
recording
Press YES to confirm.
Rotate í JOG CONTROL ë to select the desired track.
REC TR and the track number are displayed.
➜
Press YES to start normal recording.
If a program is available:
REC PROG?: for listening to the program during normal
➜
recording
5
Press YES to confirm your selection.
➜
The arrow starts blinking.The remaining recording time of
the CDR(W), the total recording time of the CDR(W)
and RECORD? are displayed.
6
Press YES to start normal recording.
➜
The arrow lights,
RECORDING IN SESSION
normal recording starts and the actual recording time left
starts to count down.
To stop recording press Ç on the set.
0 0
Do not forget to finalize! Finalizing a CDR(W) disc is
a simple procedure, necessary to:
– play a recorded CDR on a standard CD player, or
– play a recorded CDRW on a CDRW compatible
CD player and CD recorder.
is shown, high
is shown,
Publicité
