Hinkley 52 HOVER FLUSH Manuel D'instructions page 10

FINISHING THE INSTALLATION
Move fan into position over the mounting bracket and secure
1
with the 4 screws provided. (Fig. 1)
Raise the decorative ring up against the mounting bracket, the
2
four supports inside the decorative ring should be placed
against the four slots on the mounting bracket, twist the
decorative ring clockwise until snug (Fig. 2).
08 | hinkley.com
Screws
Fig. 1
Decorative
Ring
Fan
motor
Fig. 2
Mounting
Bracket
Studs