Publicité
a. Spark plug gap
a. Écartement des électrodes
a. Huelgo de la bujía
Before installing the spark plug, measure the elec-
trode gap with a wire thickness gauge and adjust it
to specification.
Spark plug gap:
0.6–0.7 mm
When installing the spark plug, always clean the
gasket surface and its mating surface. Wipe off
any grime from the threads and tighten it to the
specified torque.
Tightening torque:
Spark plug:
17.5 Nm (1.75 m·kgf)
8-45
Publicité
