Cleaning The Feeder; Advice For Use; Safety Systems - Zummo Z14 Nature Manuel D'utilisation

Masquer les pouces Voir aussi pour Z14 Nature:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42

Cleaning the feeder

Unscrew the Nut located inside the basket (Fig. 14).
Remove the Hopper Fruit Classifier pulling it upwards (Fig. 15).
Remove the Hopper Basket pulling it upwards until it is completely removed from the shaft.
Remove the Hopper Track (Fig. 16-17).
Clean all parts with soapy water or using a dishwasher machine.
Reassemble the parts as follows:
Assemble the Hopper Track.
Fit the Hopper Basket onto the shaft.
Assemble the Hopper Fruit Classifier into the Hopper Basket until it gets locked into place.
Screw the Basket top nut.
Important Notice:
The normal use of the machine may cause the plastic parts that are exposed to juice to turn orange colour. This
is completely normal and does not imply a hygiene problem or affect the physical properties of the plastic.
The reference 1402017 Drip tray and the reference V0293A-1 Nut GP must not be subjected to
temperatures higher than 40°C, so they should never be washed in very hot water or in a dishwasher;
if they are deformed by heat, the warranty will not apply.

6.10. ADVICE FOR USE

Always make sure you are using the right squeezing set of Balls, Cups and Fruit Classifier for the
size of fruit you wish to squeeze. If the fruit to squeeze is too big or too small for the squeezing kit
used, the quality of the juice may decrease, resulting in a bitter juice flavour.
The Hopper Fruit Classifier must be correctly selected according to the size of the fruit to squeeze.
If fruits are too large for the Fruit Classifier, the fruit will not fall into the Cup. If fruits are otherwise
too small, numerous pieces of fruits will fall at the same time into the Cup.
If the orange has a very thin peel, we recommend that you add a washer reference V0133 to each
of the squeezing balls (Fig. 10).
We recommend to switch off the machine when is not in use (Fig. 5).

6.11. SAFETY SYSTEMS

The machine has various safety systems:
1
If the exterior basket is incorrectly positioned, the machine will not work and the display
panel will show Error. The basket will appear shaded intermittently.
35

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Z14 nature

Table des Matières