Bestron CRISPY & CO AOV31 Manuel D'instructions page 24

baking tray will be hot!
14. Close the oven door.
15. Once you have finished grilling, rotate the function setting to
ATTENTION:
• If the food is ready but the grilling time has not yet elapsed, you can turn off the grill by rotating the
function setting to . The timer will continue, but the grill will no longer be turned on.
OPERATION - Using the roasting spit
You can use the roasting spit (13) to roast meat and poultry to a nice, even brown colour.
1. Open the oven door.
2. Place the baking tray in the bottom groove in the oven. The baking tray will collect any juice and fat
whilst roasting and prevent it from getting on the bottom heating element.
3. Remove the clamp (14) from the round end of the roasting spit.
4. Spike the meat or poultry to be roasted on the round end of the roasting spit. Make sure the roasting spit
is inserted through the middle of the meat or poultry.
5. Use the clamps to secure the meat or poultry to the roasting spit.
6. Place the roasting spit with the meat or poultry in the oven.Insert the round end of the roasting spit into
the drive sleeve (10). Place the straight end of the roasting spit on the support.
7. Leave the oven door slightly open so as to allow the air to circulate.
8. Use the temperature setting to set the required Temperature.
9. Rotate the function setting to the setting
top heat, because the bottom heat elements are covered by the baking tray which catches grease and
therefore it has no effect.
10. Use the timer setting to set the roasting time. The amount of time required depends on the type and
quantity of food.The On/Off indicator will be lit.
11. Roast the meat or poultry until it is cooked. The oven will turn itself off automatically and a sound
signal will be heard once the roasting time has elapsed. The On/Off indicator light will go out.
12. Wear oven gloves.
13. Open the oven door. Take care! The door is hot.
14. Use the removal tool to remove the roasting spit with the meat or poultry and place it on a plate.
15. Close the oven door.
16. Remove the clamp from the round end of the roasting spit and remove the meat
or poultry from the roasting spit. Take care! The roasting spit and the meat or poultry are hot.
17. Use the removal tool to remove the baking tray from the oven. Take care! Any juice and fat on the
baking tray will be hot!
18. Once you have finished, rotate the function setting to
ATTENTION:
• Make sure the meat or poultry does not touch the top heating element when turning.
• If the meat or poultry is ready but the roasting time has not yet elapsed, you can turn off the oven by
rotating the function setting to
CLEANING AND MAINTENANCE
Clean the appliance every time after use.
1. Remove the plug from the wall socket and allow the appliance to cool down completely.
2. Use warm water with a small amount of washing-up liquid to clean the baking tray, the grille, the
roasting spit and the removal tool. Rinse the items with plenty of water and dry them thoroughly.
3. Use a damp cloth to clean the interior and exterior of the oven and the door. Dry them thoroughly.
4. Place all the items back in the oven and store the oven
ATTENTION:
• Make sure the plug has been removed from the plug socket before cleaning the appliance.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
. When using the roasting spit we advise you to use only the
and remove the plug from the plug socket.
. The timer will continue, but the oven will no longer be heated.
24
and remove the plug from the plug socket.
EN