Ricatech RR3000 Retro Classic Mode D'emploi page 9

RADIO
FM Tuning
1. Press the FUNCTION /
2. Auto Tuning – Press and hold FF /
station with sufficient reception. If a station in received in stereo, (ST) is shown. Repeat step 3 if necessary until you
find the desired station.
3. Manual Tuning – Press FF /
Programming radio stations
You can store up to a total of 40 radio stations (FM and AM) in the memory, manually or automatically (Autostore)
1. Tune to your desired station
2. Press PROGRAM /
3. Press PRESET + /
4. Press PROGRAM /
station.
5. Repeat steps 1-4 to store other stations to listen to a preset station. Press PRESET + /
or more until the desired preset station in displayed.
To listen to a preset station
Press PRESET + /
Automatic programming radio stations Automatic programming will station preset 1, from this preset number upwards,
former programmed tuner stations will be erased.
1. Press and hold PROGRAM /
Icon ― memory‖ will start flashing
-
- Available stations are programmed
- After all stations are stored, the last preset station will then be played
to set the unit to FM mode.
or FB /
or FB /
to activate programming, icon ― MEMORY‖ and P01 will start flashing.
or PRESET – /
to confirm, display shows the preset number waveband and the frequency of the preset
or PRESET – /
once or more until the desired preset station in displayed.
button until Auto appears
until frequency begins to scroll the radio automatically tunes to a
briefly and repeatedly until found a station.
to allocate a number from 1 to 20 stations.
or PRESET – /
once