AXXAIR 121FS29 Mode D'emploi page 19

14. Lubricants:
Warning: Take particular care when using a liquid lubricant
on the electric cutting motor. Electric motors are not
watertight and any contact with a liquid risks causing damage
to the motor and putting the user's safety at risk.
AXXAIR offers two types of lubricants made for cutting
purposes: cutting oil Ref. CCLUH and the cutting paste Ref.
CCLUP.
15. Maintenance and Repairs:
-
Maintenance operations should be done by qualified personnel using original replacement
parts.
Before starting, it is necessary to disconnect all power supplies.
-
The machine and its accessories should always be stored and transported in their original
-
packaging.
It is essential to keep the machine clean in order to optimize its performance.
-
- The machine should be cleaned with the aid of the brush provided in the bag and lubricated
after each usage.
Don't leave the machine in a detrimental, dirty, or humid environment.
-
It is essential that foreign bodies not be placed in the swivelling system of the machine.
It is recommended that the brush provided be used to clean the machine.
Clean thoroughly and check that there are no cuttings before doing any work on the machine.
We recommend a disassembly and lubrication of moving parts by qualified personnel every year.
We offer a flat-rate maintenance contract with our workshops. For more information contact us.
Changing the vanes in pneumatic
cutting motors:
16. Environmental protection
AXXAIR packaging is 100% recyclable. Used mechanical parts and electrical equipment contain large
quantities of valuable raw materials that can be also sent for recycling.
For European countries only: Do not deposit electrical equipment in household waste! In pursuance of
European directive 2002/96/CE on recovery and recycling of waste electrical and electronic equipment
(WEEE), and its translation into national legislation, electrical apparatus must be collected separately
and undergo environmentally-friendly recycling.
ENGLISH
Never be clean with pressurised air.
Motor vanes
Ref. MO10-16
Filter and silencer
Ref. MO10-35
MO10-36
F-26800 ETOILE-SUR-RHONE
Changing the carbon contacts in
electric cutting motors:
Motor carbon
Ref. MS10-Co10
- 19 -
Z.I. Les Bosses
www.axxair.com