Design And Function; Transport, Packaging And Storage - WIKA NS100 Mode D'emploi

Masquer les pouces Voir aussi pour NS100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Design ... / 5. Transport, packaging and storage

4. Design and function

Description
Nominal size 100 and 160 mm
EN
The instruments measure the pressure by means of resilient diaphragm
measuring elements.
The measuring characteristics are in accordance with the EN 837-3 standard
In addition, the enclosing components of models 43X.30.1X0 and 43X.36.1X0
also meet the requirements of EN 837-1, relating to safety pressure gauges
with a solid baffle wall (code S3).
Scope of delivery
Cross-check scope of delivery with delivery note.

5. Transport, packaging and storage

5.1 Transport
Check the pressure gauge for any damage that may have been caused by trans-
port. Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g.
change in installation site, sending for repair).
5.3 Storage
Permissible storage temperature
-20 ... +70 °C (optional: -40 ... +70 °C)
10
WIKA operating instructions pressure gauge, model 4 per ATEX

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ns160

Table des Matières