Wine Storage; Shelf Instructions; Important - Danby DWC032A2BDB Guide D'utilisation Et D'entretien

Operating Instructions

WINE STORAGE

SHELF
INSTRUCTIONS
Fig. D
The Maximum Capacity* of the DWC032A2BDB is 36 (750mL) wine
bottles. * When stocked as per instructions below.
In order to achieve the maximum storage capacity of thirty six (36) bottles,
it will be necessary to:
1) Position 5 bottles across, as in Fig. A.
2) Finally, position three (3) bottles per staggered bottom shelf, as
shown in Fig. B, for a total of six (6) bottles per tier on the bottom 2 tiered,
staggered shelf. This will give you a total loading capacity of 36 bottles.
3) Refer to Fig.C for full storage capacity.
Fig. C
Total - 30 Bottles
refer to Fig A.
Total - 6 bottles
refer to Fig B.

IMPORTANT

Do not cover any part of the rack with aluminum foil or any other
material that will prevent adequate air circulation within the unit.
To remove a rack from its locked position, lift the rear of the rack
upward and then slide the rack out from the unit, as shown in Fig. D.
To re-install, ensure the rack is resting securely on the support brackets,
and push the rack inward until it locks into place.
7
Fig. A
Fig. B