GARDEO PRO GTTAC41-BS300E Traduction Des Instructions D'origine page 96

Press down on the cover tabs and remove the cover.

Remove the filter from the

air cleaner base..
Inspect the filter and foam

element, and replace it if
damaged.
Clean the filter by tapping it

several times on a hard
surface to remove dirt, or
blow compressed air
through the air filter from the
inside. Never try to brush off
dirt; brushing will force dirt
into the fibers.
Wipe dirt from the inside of

the air cleaner base and cover, using a moist rag. Be careful to prevent dirt from
entering the air duct that leads to the carburetor.
Reinstall the filter and cover.

Spark Plug Service
For good performance, the spark plug must be properly gapped and free of deposits.
Disconnect the spark plug cap and remove any dirt from around the spark plug area.

plug
 Remove the spark plug with a spark
wrench.
96