Urmet 3000/322 Manuel De L'utilisateur page 14

2 CONTROLS AND SETTINGS
2.1 DIRECT CONTROLS
POWER CONNECTOR
Connect the supplied power cable to the mains connector.
Control buttons (located to the right below the panel)
A. "Source" button
Press the button to display all the signal channel menus.
Press the button to change the selected parameter of the OSD menu item
B. "Downward" button
Press the button to move the cursor to the needed function.
Press the button to change the selected function in OSD menu item.
C. "Upward" button
Press the button to move the cursor to the needed function.
Press the button to change the selected function in OSD menu item.
D. "Menu" button
Press the button to display the OSD main menu.
Press the button to exit the OSD menu or OSD menu item.
E. "Power" button
Press the button to turn on or turn off the display.
Green LED (located to the right below the panel)
On: monitor on / Off: monitor off
HDMI INPUT
This connector allows the connection of an HDMI video device.
VGA INPUT
VGA input.
AUDIO INPUT
DS3000-074 14