Publicité
Les langues disponibles
Les langues disponibles
STEP 7
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
With the help of another person, turn the unit over on its front side. Position back panel as shown.
Align squarely with outer edges. Flush bottom edge of back panel with bottom edge of the bottom
and nail straight into back edges of left panel (A), right panel (B), top (C) and bottom (D).
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
ameriwoodhome.com
9
(x36)
#A21110
G
B
D
Make sure edge of back panel is
flush with bottom edge of the
bottom.
15
9
Publicité
