SolaX Power X3-MIC G2 Serie Manuel D'installation page 71

• AC output
Model
Rated output apparent power [VA]
Max. output apparent power [VA]
Nominal AC voltage [a.c. V]
Nominal AC frequency [Hz]
Rated output current [a.c. A]*
Max. output continuous current [a.c. A]
Current (inrush) [a.c. A]
THDi, rated power
Power factor range
Feed-in phase
Maximum output fault current [a.c. A]
Maximum output overcurrent
protection [a.c. A]
Short circuit current [a.c. A]
Model
Rated output apparent power [VA]
Max. output apparent power [VA]
Nominal AC voltage [a.c. V]
Nominal AC frequency [Hz]
Rated output current [a.c. A]*
Max. output continuous current [a.c. A]
Current (inrush) [a.c. A]
THDi, rated power
Power factor range
Feed-in phase
Maximum output fault current [a.c. A]
Maximum output overcurrent
protection [a.c. A]
Short circuit current [a.c. A]
* If there are two data for this parameter, each data corresponds to the corresponding voltage.
X3-MIC- X3-MIC-
3K-G2 4K-G2
3000 4000
3300 4400
3~/N/PE, 220/380, 230/400; 3~/PE, 380, 400
4.6, 4.4 6.1, 5.8
4.8 6.4
X3-MIC- X3-MIC-
10KW-G2 12K-G2
10000 12000
10000 13200
3~/N/PE, 220/380, 230/400;
3~/PE, 380, 400
15.2, 14.5 18.2, 17.4
16.0 19.1
X3-MIC- X3-MIC-
5K-G2 6K-G2
5000 6000
5500 6600
50/60 (±5)
7.6, 7.3 9.1, 8.7
8.0 9.6
30 (20 μs)
<3%
0.8 leading-0.8 lagging
Three-phase
44
39
30
X3-MIC- X3-MIC-
15K-G2 5K-G2-LV
15000 5000
15000 5500
3~/N/PE, 127/220;
50/60 (±5)
22.7, 21.8 13.2
22.7 14.5
30 (20 μs)
<3%
0.8 leading-0.8 lagging
Three-phase
44
39
30
X3-MIC- X3-MIC-
8K-G2 10K-G2
8000 10000
8800 11000
12.2, 11.6 15.2, 14.5
12.8 16.0
X3-MIC- X3-MIC-
6K-G2-LV 8K-G2-LV
6000 8000
6600 8800
3~/PE, 220
15.8 21
17.4 23.1
67