SolaX Power X3-MIC G2 Serie Manuel D'installation page 67

LCD Panel / LCD-Bildschirm / Panneau LCD / Panel LCD / Painel de LCD / LCD-paneel
/ Pannello LCD / Panel LCD / LCD panel / LCD-panel / Panou cu LCD / LCD панел /
LCD-panel / Πάνελ LCD / LCD-paneel / LCD-paneeli / LCD ploča / LCD panel / LCD
skydas / LCD panelis / LCD Panel / LCD plošča / LCD Panel / Painel LCD
Timely output power
Operating indicator light
Error indicator light
• In normal state, the "Power" / "Pgrid" / "Today" / "Total" information will be displayed
respectively. You can press the keys to switch information.
• In error state, the fault message will be displayed, please refer to corresponding
solutions in the user manual.
LED indicator Definition
Light in blue: The inverter is in normal state.
Flash in blue: The inverter is in waiting state.
Light in red: The inverter is in fault state.
Key Definition
Short press: Up, move the cursor to the upper part or increase the value.
Long press: ESC, exit from the current interface or function, or confirm the
function setting to take effect.
Short press: Down, move the cursor to the lower part or decrease the value.
Long press: Enter, confirm the selection or value change.
Power 0W
Normal Status or error information
Down/Enter
Up/ESC
63