ABUS Security-Center Eyseo TV7600 Instructions D'installation page 70

6. CAMERA SET – PIC FLIP
Picture flip feature mirrors picture horizontally. Top and bottom of picture inverted when
setting is ON. Move joystick to the right or left to select OFF/ON. The default setting is
OFF.
7. CAMERA SET – BLC (not TV7604)
The default setting of backlight compensation is OFF and the camera provides modes
OFF/ON.
OFF – Backlight compensation is not activated.
ON – Back light compensation is activated.
BLC also can be switched ON/OFF with 93 + PRESET button.
CAMERA SET – WDR (only TV7604)
Huge contrasts in picture (e.g. sunlight throu window or artificial light sources) can lead
to incorrect display of picture. If areas in with intense light sources has to be observed,
select WDR setting ON.
8. CAMERA SET – D/N MODE
IR filter is changeable due to the lighting conditions as AUTO – NIGHT MODE – DAY
MODE. The default setting is AUTO MODE. Auto mode switches automatically between
day- and night mode due to changing lighting conditions.
D/N mode also can be changed with 94 + PRESET button.
Notice: Night mode provides only black and white pictures and is suitable with IR LED
illumination.
9. CAMERA SET – DSS MODE (DIGITAL SLOW SHUTTER)
Digital slow shutter slows the picture frame rate and increases the camera sensitivity
under low light conditions. The picture will develop a granular appearance and motion
may show some lag, resulting in streaking on fast moving objects.
The default setting is OFF. This feature can be changed with 69 + PRESET button.
10. CAMERA SET – EXIT
To escape this page, move joystick rightwards.
70