ABUS Security-Center Eyseo TV7600 Instructions D'installation page 66

9. DOME SET – [NEXT PAGE] – [PASSWORD]
To enter this page for setting a password, move joystick to the right. The password is selectable
between number 001 and 255. Confirm with
ENTER PASSWORD
BY ENTERING PRESET
CODE
PASSWORD
CONFIRM
Press any number from 001~255 and preset button twice on password typing field and on
confirm field. Then "CONFIRMED" is displayed on the monitor and the menu will change to the
previous page automatically.
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM
<CONFIRMED>
If user enters different numbers between PASSWORD and CONFIRM, "CANCELLED" is
displayed on the monitor and the menu will return to the previous page automatically if user fails
3 times.
• After setting a Password, the operator has to type in memorized password in order to enter
OSD MAIN MENU, or to change any stored settings, e.g. Pattern, Tour etc.
• The operator must remember the password for the operation since the manufacturer does
not provide a master password.
•
Do not forget to leave menu with SAVE AND EXIT on first page.
10. DOME SET – [NEXT PAGE] – [OSD DISPLAY]
Various information's are displayed on monitor after set ON in this menu. It can be
hidden when OFF is selected. Move joystick rightwards or leftwards in order to select
OFF/ON when the cursor is located on mentioned item.
OSD DISPLAY
CAMERA NAME : OFF
PRESET NAME : OFF
SECTOR NAME : OFF
COORDINATE
[PREVIOUS PAGE]
***
***
***CONFIRMED
: ON
66
PRESET
button. The default setting is BLANK.
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CANCELLED
<CANCELLED>
DEFAULT SETTING