Overheating Protection - NATURE & DECOUVERTES L'ILLUSIONNISTE 60153520 Manuel D'utilisation

Lampe diffuseur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
Light button (LIGHT) :
1- Press at first time, turn on the lamp;
Appuyez une 1ère fois pour allumer la lampe.
2- Press at second time, to switch to ambiance mode.
3- Press at third time, lamp turn off.
Brightness button (BRIGHTNESS) :
1- Press to adjust the intensity of the lamp (not ambiance mode).
Light effect: Warm white color LED light.
Water shorage protection:
The machine will be automatically turned off when the water is exhausted to
protect the atomizer from being burnt or broken.

Overheating protection:

The machine will autmatically power off if abnormal overheating, such function could avoid shell
deformation caused by high temperature.
Water capacity: About 110ml.
ENTRETIEN
You are advised to change frequently the water in the tank and clean the diffuser once or twice a
week, particularly if you want to change the fragrance to be diffused.
1- Turn the appliance off and unplug it.
2- Remove the covers and pour the water into the tank. Empty the water in the opposite way
to the air outlet, do not empty the water in the air outlet, this would damage the diffuser.
3- Clean the inside of the diffuser with a soft damp cloth and a little water. If needed, use
a little white vinegar strongly diluted. Do not use corrosive detergents. Carefully rub the
ceramic disc with a cotton bud being careful about not to scratch it.
Air outlet
Empty the water
in the opposite
way to the air
outlet, do not
empty the water
in the air outlet,
this would
damage the
diffuser.
Max
Max
-14-

Publicité

Table des Matières
loading

Table des Matières