Publicité
Les langues disponibles
Les langues disponibles
6.2
operating remote control
Features:
Power / standby
Heater setting: H-0, FAN, H-1
ECO mode
Boost mode
Temperature setting
Flame color setting: orange/yellow
Flame speed setting
Ember bed color setting
Ember bed brightness setting
Top light setting
Special features:
7/24 timer programming
open window alert
Power/Standby
Heater
7/24 Timer
Turn the appliance on/off.
Turns the heater and blower on/off.
Settings:
H-0: Heater and blower off
FAN: Heater is off and blower is on
H-1: Heater and blower on
Note:
Heater control function can be enabled/disabled by holding the button for 3s. When
the heater function is disabled, "LOC" will be displayed.
Press the
button to set the current day and time.
When "MON" starts flashing, use
Press OK to complete setting.
When the hour digits start flashing, use
Press OK to complete the setting.
When the minute digits start flashing, use
Press OK to complete the setting.
Hold the
button to set the weekly schedule.
Press and hold the
for 3s.
When "MON" starts to flash, use
Press OK to complete setting.
When "--:--" starts flashing, use
Every time when the
is pressed, 30 minutes will be added or reduced.
Press
any time to clear digits. Leave hour and minute in "--:--" to not
set up the schedule.
When "18 ºC" starts flashing, use
heater (thermostat function on). Press OK to complete the setting.
After finishing step 4,
OFF logo will appear on screen. Repeat steps 2 and
3 to set the day and time for off schedule.
Repeat steps 1 to 5 to set the time ON/OFF schedule every day.
Infrared Remote
Point Remote Here
to select current day.
to select the current hour.
to select the current minute.
ON logo will appear on screen.
to select the desired day.
to select the time. Press OK to confirm.
to select desired temperature to on
W415-4173 / A-0 / 11.20.23
operation
EN
35
Publicité
