Publicité
Les langues disponibles
Les langues disponibles
Programming the fill up level / default time
34
Heating (default time 30 sec. / approx. 120 ml hot milk)
Start
Stop
Press A for approx.
Press A again to set
3 seconds until it flashes
the cup volume
Frothing (default time 20 sec. / approx. 100 ml foam & milk)
Start
Press B for approx.
Press B again to set
3 seconds until it flashes
the cup volume
4.3 Reset to factory settings
Press both buttons
simultaneously for
3 seconds
Energy saving mode
5
•
After 5 minutes of NON using the appliance, the appliance will automatically switch into energy-saving mode.
The buttons will light up alternately.
•
By pressing either one of the buttons, the appliance will resume in normal function mode.
•
The energy-saving mode time can be changed from 5 minutes (factory default time) to 30 minutes.
-
For 5 minutes setting: press and hold button A and switch on power until all buttons light up.
-
For 30 minutes setting: press and hold button B and switch on power until all buttons light up.
GB
10
5 sec
60 sec
Setting range cup
volume 5 - 60 seconds
Stop
5 sec
30 sec
Setting range cup
volume 5 - 30 seconds
Protection function
•
The CLEAn button will flash fast when the front cover or the milktank will be removed from the appliance.
Cleaning the appliance
Before starting the cleaning process
Fill water tank with fresh
Take out the milktank and
water (max. 600 ml)
place cleaning cup
This appliance has two cleaning programs: short clean & long clean
The application is as follows:
Long clean x2
• Before the first use
• After long periode of non-use
• When appliance not in use
• At the end of the day after use
30 sec
60 sec
Press the button once for
Hold the button for
a short program
> 2 sec. to start a long
(30 seconds)
program (60 seconds)
Cleaning the outside of the appliance
•
Remove the plug from the outlet before cleaning the appliance.
•
Wipe outside with a soft, dry cloth, after the appliance is cooled down. Never use metal polish!
•
The removable items are NOT dishwasher safe
Fill the milktank with
water for thorough
cleaning (min. 200 ml /
max. 600 ml)
Short clean
• Before the first use every day
• Between each cups if there is an interval time of more
than 30 minutes.
NOTE
• It is compulsory to clean the front cover and
the froth head in water after the LOng CLEAn
program, for hygenic purposes. The milk tank
and suction pipe must be cleaned after use.
It is recommended to immerse them in warm wa-
ter overnight.
6
7
GB
11
Publicité
