Publicité
Les langues disponibles
Les langues disponibles
en-us Operation
Set the desired time in the settings area.
2.
To cancel the kitchen timer, set the time to .
6.6 SpeedBoost®
With this function you can heat larger quantities of water
faster than with power level 9. This function temporarily in-
creases the top output of the selected cooking zone.
Restrictions for using the SpeedBoost® function
¡ This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
¡ If the function is not available,
play of the selected cooking zone. The power level
set automatically.
Activating SpeedBoost®
Press
to select the cooking zone.
1.
Touch Speed Boost.
2.
lights up in the cooking zone display.
a
Deactivating SpeedBoost®
The function may be deactivated automatically to avoid
overheating. This serves to protect the internal electronic
components of the cooktop.
Press
to select the cooking zone.
1.
Press Speed Boost.
2.
goes out.
a
a The cooking zone switches to power level .
Notes
¡ In certain circumstances, this function may switch off
automatically in order to protect the electronic elements
inside the cooktop.
¡ If you have set a power level before activating the func-
tion, this power level is used automatically after the
function has been deactivated.
6.7 Panel lock
You can use the panel lock to prevent the cooktop from
being turned on accidentally.
CAUTION
The panel lock may be turned on and off accidentally due
to:
water spilled during cleaning
▶
food that has overflowed
▶
objects being placed on the panel lock touch key.
▶
Activating the panel lock
Requirement: The cooktop is turned off.
Touch Panel Lock for 4 seconds.
▶
a The indicator over Panel Lock lights up for 10 seconds.
14
and
blink on the dis-
is
a The control panel is locked.
Deactivating the panel lock
Touch Panel Lock for 4 seconds.
▶
a The control panel is unlocked.
Automatic panel lock
This function automatically activates the panel lock when
you switch off the cooktop.
The automatic panel lock can be activated in the basic set-
tings → Page 14 .
6.8 Wipe protection
With this function you can avoid changing the settings
while cleaning the control panel during cooking.
This function does not lock the main switch. You can turn
the cooktop off at any time.
Activating wipe protection
Touch Panel Lock.
▶
a The indicator above Panel Lock lights up.
a The control panel is locked for 35 seconds.
a After 30 seconds a beep indicates that the wipe protec-
tion is about to turn off.
Deactivating wipe protection
You can turn off the wipe protection manually.
Touch Panel Lock.
▶
a The indicator above Panel Lock goes out.
6.9 Basic settings
You can configure the basic settings for your appliance to
meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display
Function
Panel lock
1
– Manual
– Automatic
– Function deactivated
Signal tones
– Confirmation signal and error signal are
off. The main switch signal remains on.
– Only error signal is on.
– Only confirmation signal is on.
– Confirmation signal and error signal are
on
1
.
Duration of timer end signal
– 10 seconds
– 30 seconds
– 1 minute
1
Factory setting
2
Factory setting (may vary according to model)
3
The cooktop's maximum power output is shown on the
rating plate
1
Publicité
