Enhancement Settings; Hearing Aid - Nokia 6275i Guide D'utilisation

Enable default mode connection
Connect to your PC in Default mode to transfer phone data and files between
your phone and PC using PC Suite.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
is displayed that asks which mode you want to select.
2. Select Accept > Default mode. A notification is displayed stating that
a connection is active.
You can now use PC Suite to connect to your phone.
Disable data storage connection
1. To disable the USB data cable, double-click the green arrow on the taskbar
at the bottom of your PC screen.
Unplug or Eject Hardware is displayed.
2. Click on USB Device in the Hardware devices window.
Stop a Hardware device is displayed.
3. Highlight USB device, and click OK.
The Safe to Remove Hardware pop-up window is displayed with the
following message "The 'USB Device' device can now be safely removed
from the system."
4. Click OK.

■ Enhancement settings

The enhancement settings menu is shown only if the device has been connected
to a compatible enhancement. Select Menu > Settings > Enhancements >
Hearing aid, Headset, Handsfree, or Charger.

Hearing aid

To use a T-coil hearing aid with your device, select Menu > Settings >
Enhancements > Hearing aid > T-coil hearing aid mode > On or Off.
Headset
Important: The headset may affect your ability to hear sounds around you.
Do not use the headset in situations that may endanger your safety.
Select the option of your choice to enter the submenu and modify its settings.
Default profile—Choose the profile you want automatically activated with
a headset connected.
Automatic answer > On or Off—Answer calls automatically after one ring with
a headset connected.
S e t t i n g s
35