List Of Pieces; Assembling The Patio Heater - Clatronic THS 3550 Mode D'emploi

Item Description
Wrench
12 Pedestal
Wheel set
+ screw M8 X 16
+ nut M8
+ washer M8
10 Square tube, 90° bent
+ screw M8 X 16
8 Standpipe
+ screw M6 X 30
+ nut M6
11 Compartment for the gas cylinder
To assemble the barbecue, you will need: • 2 persons
Beforehand, remove the protective film that is attached to the surfaces.
When assembling, familiarise yourself with the list of parts and the illustrated assembly instructions:

List of pieces

pc.
2
1
1
2
2
4
3
3
1
6
6
1

Assembling the patio heater

• Protective gloves
• If necessary, put a blanket downbase
• Screw wrench for side walls 10, 14 and 17 (included)
• Screwdriver (Size PZ2)
• Pliers
• Leak detector or soap solution
Item Description
7 Burner unit
Gas pipe 880 mm with cap nut and thread
EDS screws for attaching the burner to the
standpipe M6 X 10
1 Reflector consisting of parts
+ screws M5 X 10
+ cap nuts M5
+ washers M5
+ distance bolts M8 X 10
+ wing nuts M8
+ washers M8
pc.
1
1
4
3
9
9
6
1
3
6
47